Detailed Description

CHARACTERISTICS:

SGMQ-320 Multi FunctionaITwo-heads Die Cutter is the newest innovation and design. lt's easy operated and stable performance. Material feeding is controlled by the servo motor and operated by touch screen. Automatic paper feeding, Laminating, hot stamping, die cutter, automatic sheet or rewinding can be completed in one pass. And all are controlled by PLC, and 2nd pass sensor for tracking mark, The machine occupies small area, lower noise, high speed, precise die cutter etc. Unwinder and rewinder air shaft are controlled by separate motor.This machine is a best and efficient machine for the electronics industry and IT industry. It used for electronic, electrical equipment, mobile, special rubber pad,silicone paste, grinding paste, conductive tape, double face tape, LED, and plastic film.

TECHNICAL SPECIFICATIONS:

Max. Web width: 320mm

Max die cutter length: 320mm x 290mm

Die cutter speed: 1800-12000pcs/h

Overalldimensions ?L×W× H ): 3120X1270X1890mm

Die cuter mold height: 20mm

Max. die cutter pressure: 5 Tons

Power: AC 380V5.5 kw

Machine weight: 3800kgs

Detailed Description

CHARACTERISTICS:

This is a high precision flat bed die cutter. Material feeding & cutting are controlled by servo motor. Lateral sides are controlled by 2pcs of sensor and lineal side is controlled by one of sensor. Laminating, diecutting, waster removal, sheeting or rewinding can be completed in one pass. It is suitable for cutting pressure sensitive label and holographic anti-counterfeiting label. It is a best, efficient partner for adhesive label printing machine and hologram diecutter and is also applicable for label house. electronic parts die cutting and adhesive tape sectors.

OPTIONALS:

In-mold label die-cutting

Interval extended hot stamping & die-cutting

Holograph hot slamping & die-cutting

TECHNICAL SPECIFICATIONS:

Cutting speed: 20-220 cycle/min

Max. unwind diameter: 500mm

Max. Web width: 320mm

Max. die cutting width: 300mm

Max. die cutting length: 290mm

Positioning accuracy: +0.1mm

Total capacity: 2.7kw

Power: 220v+5%

Overall dimensions(LxWxH): 2800x1100x1600mm

Machine weight: about 1500kg

Detailed Description

CHARACTERISTICS:

ZMQ-320 Semi rotary die cutting machine is the new develope converting machine with in line slitter.it adopt servo-control system to achieves optimizatiom control of machine.witch assure high accuracyand the stability of die cutter.Automatic paper feeding, web guide,lamination uv flexo coating,die cutting.slitting can be completed on pass.The machine occupies small area.lower noise,high speed, it's the best choice for label house,electronic parts die cutting and adhesive tape sectors.

OPTIONALS:

UV flexo printing unit

Slitting device

Single sheet device

Inspecting system

Digital Inkjet

TECHNICAL SPECIFICATIONS:

Max Speed(Semi Rotary Die cut): 300cycle/min(about 60m/min)

Max Full Rotary Speed: 130Meters/min

Accuracy of adhesive Cutting: ±0.10mm

Accuracy of IML Cutting: ±0.25mm

Max Die Cutting Area: 400mm×310mm(L×W)

Paper Width: 100-310mm

Max Unwinding Dia.: 700mm

Max Rewinding Dia.: 700mm

Magnetic Cylinder : 144Teeth 1/8"CP(Standard )

Repeat Length of Die Cutting: 50mm?400mm

Motor Power: 10kw

Overall Diameter(L×W×H): 3200mm×1310mm×1700mm

Weight: 2750KGS

Detailed Description

CHARACTERISTICS:

FQ-330 R/450R Slitting machine with rotary die-cutting function is a new product. It equipped with high accurate rotary die-cutting system in FQ-320/450 machine. This machine is suita ble for blank adhesive labels.Die-cutting&slitting can be finished in one process. It has the function ofautomatic meter counting, automatic stop, web guiding by photocell. The machine has the characteristic of compact structure, fast speed, high efficiency, easy operation, accurate slitting and steady running etc.

OPTIONALS:

Slitting part and Die cutter(magnetic cylinder)

TECHNICAL SPECIFICATIONS:

Cutting speed: 75m/min

Die-cutting speed: 60m/min

Die cutting repeatlength: 206.375-476.25mm (65-150)

Max web width: 320mm

Max unwinding diameter: 500mm

Max rewinding diameter: 450mm

Overalldiameters?L×W× H ): 1650x1000x1700mm

Machine weight: about 650kg

Detailed Description

CHARACTERISTICS:

Auto slitting machine FQ-320/450 type is an accessary equipment for fully automatic label printing machine and roll to roll die cutting machine. It is suitable for slitting paper into narrow stripes. It has total length counter. label counter,predetermined counter, speed adjustment. alarm, pneumatic coreholder & tension control. Edge guide on unwind is agitated by German made photo-eteclrical eye. It is a fast running, accurate slitting. ease of operation and stable equipment under tight construction.

TECHNICAL SPECIFICATIONS:

Max.Web width: 320mm/450mm

Max.Rewind diameter: 500mm

Min.Slitting width: 16mm

Slitting accuracy: ±0.15mm

Slitting speed: 85m/min

Overall dimensions(LxWxH): 1500x1000x1200mm

Machine weight: 430kg

Detailed Description

MAIN CONFIGURATION:

1. The structure od Machine chassis and wallboards welds Casting and beam channel.

2. Unwind tension adopts 10kg magnetic powder brake 1 pcs

3. Rewind tension adopts 10kg magnetic powder clutches, 2pcs

4. Unwind adopts 3 inch air shaft and mechanical axis, 1pcs

5. Rewind adopts 3inch air shaft, 2 pcs

6. Unwind adopts photoelectric automatic web guider

7. Circular balde/razor slitting device (optional), 10 groups.

8. Main motor adopts 7.5kw Shanghai Danma motor, 1 pcs, and inveter(Japan Yaskawa)

9. Driving part consists of triangle belt and 4 double chains.

10. Waste material adopts 0.55kw centrifugal fan. 1 pcs

TECHNICAL SPECIFICATIONS:

Web width: 1300mm

Unwind diameter: ?1000mm

Rewind diameter: ?420mm??600mm customizable?

Min.slitting width: 50mm-1300mm

Machine speed: 160m/min

Total capacity: 8.5KW

Detailed Description

CHARACTERISTICS:

1. Servo driven

Independent servo driven system in each unit to guarantee stable register at high printing speed.

2. Printing unit

Use the most advanced inking system which has 23 inking rolls, four large diameter form rolls included and alcohol damping system to guarantee printing quarlrty.

3. Pre-register system

Based upon the printing length, log data into the sliding control station,each unit will automatically be adjusted to its ready position.

4. Register system:

Each printing unit can remote adjust register which includes lineal, lateral and skewing without stopping the press to save time and educer the waste of substrate.

5. Vacuum backflow control unwind

Vacuum backflow cylinder should be able to prevent scratches on the back of P/S label during intermittent motion.

6. Joystickless

Fully automatic operation system including pressure adjustment, inking roll washup.roller impression, etc.

7. Easy to operate

Equipped with sliding touch screen control station which can be moving around to increase the efficiency of operator.

8. Printing size

Paterted technology to minimize printing size to achieve larger scale of variable size printing.

9. Control system

Apply electronic component from famous international brand to guarantee long term reliable operation.

10. Lubrication system

Centralized automatic lubrication.

11. This equipment adopt lastest German technology of offset press with reasonable structure, low noise and energy consumption.

OPTIONALS:

Automatic ink roller washup system

UV flexo printing station: Equipped with anilox roll to do the UV coating or white color printing on transparent material.

Remote inking system

Letterpress printing unit

Cold foil stamping device

Rotary diecutting device: Use flexible die and magnetic cylinder to do any shape's cutting.

Silk screen printing unit

Laminating device: A intermittent laminator can be added before rotary diecutting during high speed intermittent printing.

CCD Camera

Web guide system.

Digital printing unit:It is a colorful non-contact variable information printing system which can combine with traditional printing technology to perfect level.

TECHNICAL SPECIFICATIONS:

--MODEL ZTJ-330--

Max. web width: 330mm

Max. printing width: 320mm

Printing repeat: 100?350mm

Thickness of substrate: 0.1?0.3mm

Machine speed: 50-180rpm(50M/min)

Max. unwind diameter: 700mm

Max. rewind diameter: 700mm

Pneumatic requirement: 7kg/cm²

Total capacrty: 30kw/6 colors(Not including UV)

UV capacity: 4.8kw/color

Power: 3 phases 380V

Overall dimension(LxWx H): 9500 x1700x1600mm

Machine weight: about 13 ton/6 colors

--MODEL ZTJ-520

Max. web width: 520mm

Max. printing width: 510mm

Printing repeat:150?380mm

Thickness of substrate: 0.1?0.35mm

Machine speed: 50?160rpm

Max. unwind diameter: 1000mm

Max. rewind diameter: 1000mm

Pneumatic requirement: 10kg/cm²

Total capacrty: 60kw/6 colors(Not including UV)

UV capacity: 7kw/color

Power: 3 phases 380V

Overall dimension(LxWx H): 11880x2110x1600mm

Machine weight: about 15 ton/6 colors

Detailed Description

CHARACTERISTICS:

1. Servo tension control system: maintain constant tension to guarantee the stability of register.

2. Quick change system: Easier to change plate cylinder and anilox roll to save operating time.

3. High capacity drying system: Unique design of hot air drying system to improve efficiency of drying and increase printing speed.

4.Multi-function capability: Combine laminating,coating, foil stamping,silk screen, delam/relam and diecutting processes, etc. in one pass.

OPTIONALS:

1) All UV printing

2) Laminating

3) Turn bar

4) Cold foil stamping

5) Hot foil stamping

6) Back score

7) Shear slitter

8) Corona treater

9) Ink pump

10) Shingle stacker

11) Dust remover

12) Enclosed doctor chamber

13) Upper rewind

14) Video inspection system

15) Rotary silk screen

16) Delam/Relam

TECHNICAL SPECIFICATIONS:

Max. Web width: 330mm

Max. printing width: 320mm

Printing repeat: 229?502mm

Rotary cutting repeat: 254mm?502mm

Thickness of substrate: 0.1?0.3mm

Available print colors: 12

Designed mechanical speed: 160m/min

Maximum unwind diameter: 1016mm

Maximum rewind diameter: Single rewind 1016mm

Dual rewind 762mm

Maximum waste rewind: 700mm

Capacity of main motor: 11kw/below 8 colors

Capacity of hot air dryer: 5kw/above 8 colors

6kw/unit

Main power: 380V /AC 3 ph ase 5 0Hz

Capacity of UV dryer: 160w/cm

Overall dimension(LxWxH): 8500x1222x 2000mm

Machine weight: 5000kg/8Colors

Detailed Description

CHARACTERISTICS:

1. Servo-control system achieves optimization control of machine, which assure high accuracy and stability for registratian.

2. Creative front & back vacuum driving roller and ceramic roller in paper-feeding system saves extra substrate for removing rider wheels.

3. Special printing unit combined rotary letter press & intermittent printing,convert both functions easily on one machine.

4. Creative lateral & lineal registration system electrical controlled can be adjusted easily through the panel on printing unit or center control screen.

5. Creative ink distributing system avoids bar marking and ghosting, inks volume varies with printing speed automatically.

6. This machine is best one to print middle & top class labels in large,medium and small batch of production.

7. Indicate malfunction of machine on the center control screen to speed up the maintenance of machine.

OPTIONALS:

Silk screen device, Glue side device, Web guide device and Cold foil device

TECHNICAL SPECIFICATIONS:

Max. Web width: 310mm

Max. printing width: 300mm

Printing repeat: intermittent 50-260mm rotary 55-96T( 174.6-304.8mm)

Color: 2-9 colors

Thickness of substrate: 0.1?0.3mm

Machine speed: intermittent 250r/min rotary 75m/min

Max. unwind diameter: 700mm

Max. Rewind diameter: 700mm

Total capacity: 17.3KW Not Including UV

Power: 380V/AC?Three-phase 50/60H 50A

Overall dimension(L x W x H): 6800x1600x1400mm

Machine weight: 6800kg/6 colors

Detailed Description

CHARACTERISTICS:

1. Adopt paper reciprocating mode. One printing roller could do the job regardless the repeat size.

2. Adopt servo control system to control every roll in printing system, which make the optimized perfor-mance of machine .

3. Optimization of ink rollers could prevent bar marking and ghosting to improve the printing quality.

4. The supply of ink will change pro-portionally with the speed of the machine to make printing result better.

5. Malfunction of the machine would be shown on the screen automatically,which will shorten the repair time.

6. Paper unwinding, printing, UV vanish, rotary diecutting, waste removal and rewinding can be completed in one pass.

7. This equipment is suitable for printing middle & upper class labels in large .middle and small batch of production.

OPTIONALS:

Magnetic cycinder, Flexo UV coating equipment, Ultra violet radiation curin equipment, CCD camera, The servo control system, The independent motos adjust the ink system, Vaccum paper feeding, Central controller system, Second pass system, and Superior ink transfer system.

TECHNICAL SPECIFICATIONS:

Max. Web width: 310mm

Max. printing width: 290mm

Printing repeat: 50?260mm

Color: 2?8 color

Thickness of substrate: 0.1?0.3mm

Machine speed: 30-250r/min

Max. unwind diameter: 700mm

Max. Rewind diameter: 700mm

Total capacity: 17.3KW Not Including UV

Power: 380V/AC.Three-phase 50/60H 50A17.3KVA

Overall dimension(LxWxH): 6800x1600x1400mm

Machine weight: 6800kg/6 color

Detailed Description

CHARACTERISTICS:

1. The main motor adopts imported inverter to govern a stepples speed adjustment.

2. The printing units are all equipped with a group of infrared dryers respectively.

3. Each IR dryer device of printing unit is interchangeable to UV dryer.

4. Feeding and rewinding are controlled through magnetic particle brake and clutch (Japanese Mitsubishi auto tension controller).

5. Un winder and rewinder adopt air core holder.

6. Three unit rotary cut with stand-roller make multi-cut can be processed

7. Adopt ceramic anliox roller which offers durability, wear resistance and corrosion resistance, also is more efficient on produ-ction by reducing the times of changing rollers.

8. The printing unit can register in 360 degrees. Each printing unit can be independently geared and loosen to have rest of units continue to printing.

9. The inking roller will be automatically off impression when press stop and rotate at lower speed in order to keep the ink from being drying.

10. Paper unwind, printing, UV vanish laminating, rotary diecutting, waste removal and rewinding can be processed in one pass. It has characterized by wide application, fast printing speed and high economic efficiency ink will not contaminate environment. So it is an idea printing machine for the business form, Tag and high end pressure sensitive label.

TECHNICAL SPECIFICATIONS:

--MODEL LRY-330--

Max. Web width: 330mm

Max. printing width: 320mm

Printing repeat: 180mm-380mm/min

Color: 2~6

Thickness of substrate: 0.1~0.3mm

Machine speed: 10m-80m/min

Max. unwind diameter: 650mm

Max. Rewind diameter: 650mm

Main motor capacity: 2.2kw

Main power: 380V/AC 3 phase 50Hz

Overall dimension(L x Wx H): 2420x1020x2740mm

Machine weight: 2500kg

--MODEL LRY-450--

Max. Web width: 450mm

Max. printing width: 440mm

Printing repeat: 180mm-380mm/min

Color: 2~6

Thickness of substrate: 0.1~0.3mm

Machine speed: 10m-80m/min

Max. unwind diameter: 650mm

Max. Rewind diameter: 650mm

Main motor capacity: 2.2kw

Main power: 380V/AC 3 phase 50Hz

Overall dimension(L x Wx H): 2420x1020x2740mm

Machine weight: 3000kg

Detailed Description

CHARACTERISTICS:

1. The main motor adopts imported inverter to govern a stepples speed adjustment.

2. Feeding and rewinding are controlled through magnetic particle brake and clutch (Japanese Mitsubishi auto tension controller).

3. Un winder system is controlled by edge guide sensor.

4. Adopt ceramic anliox roller which offers durabilitlr, wear resistance and corrosionresistance. also is more efficient on production by reducing the times of changing rollers.

5. The printing units are all equipped with a group of infrared dryers respectively .

6. Each IR dryer device of printing unit is interchangeable to UV dryer.

7. Un winder and re winder adopt air core holder.

8. The printing unit can register in 360 degrees. Each printing unit can be independently geared and loosen to have rest of units continue to printing.

9. The roll feeding, printing, UV vanish, auto infrared drying. laminating and rewinding can be processed in one pass. It has characterized by wide application. fast printing speed and high economic efficiency Ink will not contaminate environment. So it is an idea printing machine for the business form. Tag and high end pressure sensitive label.

10. The inking roller will be automatically off impression when press stop and rotate at lower speed in order to keep the ink from being drying.

TECHNICAL SPECIFICATIONS:

--MODEL RY-330--

Max. Web width: 320mm

Max. printing width: 310mm

Printing repeat: 180mm-380mm/min

Color: 2?6

Thickness of substrate: 0.1?0.3mm

Machine speed: 10m-80m/min

Max. unwind diameter: 600mm

Max. Rewind diameter: 550mm

Main motor capacity: 2.2kw

Main power: 380V/AC 3 phase 50Hz

Overall dimension(L x Wx H): 3000x1500x3000mm

Machine weight: 2000kg

--MODEL RY-450--

Max. Web width: 450mm

Max. printing width: 440mm

Printing repeat: 180mm-380mm/min

Color: 2?6

Thickness of substrate: 0.1?0.3mm

Machine speed: 10m-80m/min

Max. unwind diameter: 600mm

Max. Rewind diameter: 550mm

Main motor capacity: 2.2kw

Main power: 380V/AC 3 phase 50Hz

Overall dimension(L x Wx H): 3000x1700x3000mm

Machine weight: 2300kg

Detailed Description

CHARACTERISTICS:

1. Employed up-and-down adjustable precise screw unit, Japanese SINCO high grade amplified lens,CCD camera ,HF liquid crystal monitor for displayer.

2. Adopted upper and down adjustable Japanese SINCO high-grade amplifier, CCD camera and HD liquid crystal monitor for its displayer.

3. The camera can be adjusted in all directions.Higher precision of printing plating adhesion and accurate registering.

4. The printing plate can be stuck in telescope.

5. Faster sticking the printing plate,ease of operation,higher production capacity.

6. Applied to printing the relief printing materials like soft rotary printing and resin printing.

TECHNICAL SPECIFICATION:

--MODEL YG450--

1. Dimensions: 700x1060x1820mm

--MODEL YG950--

1. Dimensions: 1200x1060x1820mm

--MODEL YG1500--

1. Dimensions: 1750x1060x1820mm

Detailed Description

CHARACTERISTICS:

1. It is made of stainless steel,featuring in durability and won't get rusty;

2. Adopted imported Philip specific printer lamp,Philip rectifier(frequency transforming type is good for registering);

3. Imported slow reflective violet suction membrane(Japan Toyo);

4. Computer controller enables it to be easily operated;

5. Adopted American digital integrated thermo sensor;

6. Adopted American thermo sensor;

7. Japanese panasonic or oriental printing plate washer,Japanese ORIX constant dsry oven,featuring in strong wind;

8. Adopted philip specific UVC light source for removing the sticking sheet;

9. Integrated exposure,washing printing plate and removing sheet,it is a good equipment for making soft printing plates;

TECHNICAL SPECIFICATION:

--MODEL 430x340mm--

1. Dimensions: 710x610x1050mm

2. Power: 2.2KW

--MODEL 600x400mm--

1. Dimensions: 860x710x1050mm

2. Power: 2.3KW

--MODEL 900x600mm--

1. Dimensions: 1190x910x1150mm

2. Power: 3.5KW

--MODEL 1200x1000mm--

1. Dimensions: 1500x1310x1160mm

2. Power: 3.8kW

Detailed Description

CHARACTERISTICS:

1. Adopt industrial piezoelectric type nozzle and DOD inkjet control technology, long service life and low maintenance costs.

2. Support the spray print of the text?digits?normal one-dimensional bar code, two-dimension code and electronic supervision code.

3. High spray printing precision? horizontal spray print DPI can be elected, vertical DPI can be elected from 180-720DPI.

4. High speed, the spray speed is about 50-120m/min.

5. UV environmental ink, low costs, ink costs ofthe single label is lower than thermal transfer technology.

6. Adopt roll to roll feeding way, has unwind and rewind device, the max material width is 330mm.

7. Imported web guide system and tension control, the machine can operate more steadily.

8. Unwind, spray print, solidify, inspect? waste discharge and rewind adopts integrative design? higher efficiency and more humanized management.

TECHNICAL SPECIFICATIONS:

1. Best work speed: 30-50 m/min (K series)

70-100 m/min (G series)

2. Nozzle service life: ?2years

3. Best work DPI: 360X400DPI? 360X300DPI

4. Nozzle width: 13mm/36mm/72mm

5. Max. printing width: 330mm

6. Max. printing unit: 8units

7. Printing precision: horizontal 360? 400? 500dpi

vertical 180-720dpi

8. Highest speed: 120m/min

Detailed Description

APPLICATIONS:

1. ZJP-N8033 is an inspection machine commonly used in roll-to-roll continuous process to inspect print quality of soft packets.

2. ZJP-N8033 is also a web inspection slitting and rewinding machine commonly used in roll-to-roll continuous process to inspect print quality and perform slitting operations on adhesive labels for industries of pharmaceuticals, food, fine chemicals, electronics, security printing and so forth.

3. High-speed inspection of up to 240 meters per minute, achieving productivity enhancement

4.Equipped with precise servo motors, offset pivot guides, and tension controllers

5.Optional stand-alone machine used to review defects, making non-stop detecting available to improve the efficiency of inspection

TECHNICAL SPECIFICATIONS:

Maximum inspection width: 30m/min?240 m/min?cu stomizable

Maximum inspection speed: 0.08mm?width?×0.14 mm?length?

Image resolution: (customizable)

Minimum defect size (as a point): 0.15mm2?contras t?20?

Minimum defect size (as a line)(W x L): 0.15mm×5 mm?contrast?20?

Minimum color variances detected: ?E ? 3

Minimum registration deviation detected: ±0.2 mm

Material thickness: 0.08?0.4 mm

Maximum rewind diameter: 800 mm / 650 mm

Core inner diameter: ?76 mm??150 mm

Module (optional): Supervision code/2D code etc.